Sunday 16 May 2010

Drinking cup, Kuksa made from London plane burr

Drinking cup

I made this a while ago from London plane burr, a lovely wood to work with, and a very small tight grained burr. I do not usually sand these cups preferring the tooled finish, the wood being highly figured, sanding would only enhance it. The inside is left with a tooled finish.

I have Kuksas for sale, just contact me for details or have a look on my web site, which at the time of publishing is the old site, without kuksas on. New site within the next couple of weeks.
These cups are made with a bandsaw, to cut the blank, axes, chisels and knives both straight and hooked. The finished cup is soaked in a pot of melted raw beeswax, and is perfect for any cold drinks including spirits.

4 comments:

  1. I really like this. how does the beeswax hold up.

    ReplyDelete
  2. Very nice Kuksa Sean! I've made spoons from London Plane before it is nice wood to work.
    All the best.

    Simon.

    ReplyDelete
  3. Matthew & Simon, thanks for the kind comments.
    The beeswax holds up very well, the wax is soaked into the wood, not rubbed onto it, so even if it appears to wear off it is still doing its waterproofing job.
    If you do not have enough wax to melt to drop your kuksa into just rub wax all over and put in the microwave, for a wee bit. Rub more wax over, heat again, and continue until you think enough has been soaked in. You will be surprised at how much wax can go into such a small wooden object.

    ReplyDelete


Sorry, because of the huge amount of dubious people leaving spam comments for their useless stuff, I unfortunately have to bring back word verification.