Sunday 27 June 2010

Pure beeswax finish on willow box

Applying a beeswax finish with heat

I finished the other willow box (the one which I made too small) with a pure beeswax finish; melting the beeswax until liquid and painting it on the inside which had been warmed with a heat gun. The wax sets quickly and the hot air gun was then used to melt it into the wood. The outside of the box was then waxed and any remaining liquid wax rubbed off; the box was then buffed.
I use the same technique with shrink pots and drinking cups, but if the cups fit into the my wax pot I just leave them to soak, turning them around occasionally.



I like this technique as the wax is soaked into the wood and does not just sit on the surface. Wax inside the shrink pots means that they are food safe and do not smell. Use Danish oil and the smell of the oil takes months to disappear. With my green woodwork items I am wanting to use natural finishes that can be made at home, it is a big subject and I do not have much time to research it at the moment, any recipes are gratefully received.




3 comments:

  1. Nice box Sean. I use the same technique of dipping in hot beeswax for some of my knives because the hot wax gets into the small gaps between metal parts and wood and fills them, so that gunge can't accumulate. I think you can use pure Tung oil which is a "pure" product. Have a look at this site www.realmilkpaint.com/oil, it tell you quite a bit about ther various grade of Tung oil.

    ReplyDelete
  2. Very nice Sean I really like these boxes.

    Simon.

    ReplyDelete
  3. I'd like to hear about this wax on cups method you mentioned.

    I've turned a few goblets, and I wanted to finish them in a non toxic way.

    badger

    ReplyDelete


Sorry, because of the huge amount of dubious people leaving spam comments for their useless stuff, I unfortunately have to bring back word verification.